- 6600-1123-400
- Roll pin Giraffe OmniBed Uprights and lift rail components.
- 6600-1464-500
- Upper buoyancy spring Giraffe OmniBed Rail End caps.
- 6600-0016-850
- 230/240V 540W (model 2001/series 3000 w/HCA or HCC) Infant Warmer Assembly.
- 6600-0011-850
- Lamp holder kit Units with HCA or HCC serial numbers (pins) Infant Warmer Assembly.
- 2030431-005
- CD EASYWARE V2.9 EasyOne-CS
- M1082945
- iCentral 05 Basic Level Software HP xw4300 Workstation – iCentral/Mobile Care Server
- 6600-0207-800
- Single drawer storage module (beige/blue fronts) Elevating Base and Stationary Pedestal Storage Modules.
- 6600-0317-400
- Hex key STD 1/8 x 2-1/4 Elevating Base and Stationary Pedestal Storage Modules.
- 6600-0423-500
- Upright Elevating Base and Stationary Pedestal Rails.
- 6600-0449-400
- Screw 8 x 5/8 PH Elevating Base and Stationary Pedestal Rails.
- 901142-001
- CAM14 Unit with AHA CAM-14 Version 1 ( ECG Amplifier ) Product Code RMF
- 901142-002
- CAM14 Unit with IEC CAM-14 Version 1 ( ECG Amplifier ) Product Code RMF
- 0214-2275-711
- Mounting Plate Infant Warmer Controller Assembly-4 (5000 and all Modles with HCA).
- 0140-6627-108
- Screw 8-32 x 1/2 Philips Infant Warmer Heater Connections.
- 0211-1472-300
- Nylon Grommet Infant Warmer Controller Assembly-5 (All Models).
- 6600-0333-700
- Controller Wire Harness All models with HCA and HCC serial number (left-hand) Infant Warmer Controller Assembly-5 (All Models).
- 6600-0211-700
- Intermediate harness (display/control board cable) Care Plus Series 3000/4000 Incubator Wire Harnesses and Additional Controller Components
- 6600-0550-500
- ThermaLink chassis Infant Warmer ThermaLink Option Assembly.
- 6600-0551-500
- ThermaLink chassis cover Infant Warmer ThermaLink Option Assembly.
- 6600-0805-501
- Bed support cover (light grey) Infant Warmer Frame Assembly (3400/4000/5000).
- 0217-5296-542
- Upright mounting bar Infant Warmer Frame Assembly (3000/3300/4000/4300).
- 0217-5284-300
- Upright tie-rod 1/2-13 x 6 Infant Warmer Model 3500 frame assembly.
- 6600-0233-500
- Reinforcing plate (used on both cross members) Infant Warmer Frame Assembly (3000/3300/4000/4300).
- 0202-3425-300
- Lock washer 1/2 int Infant Warmer Frame Assembly (3000/3300/4000/4300).
- 6600-0339-700
- Locking lug assembly Infant Warmer Frame Assembly (3400/4000/5000).
- 1011-3295-000
- Counterweight Aisys Default mounting (DU only / no monitors)
- 1011-3635-000
- Bracket Aisys Clipboard
- 413628-002
- DAT TAPE 120 METER DDS-2 (4GB) MARS Unix
- 413628-201
- DAT TAPE 125 METER DDS-3 (12GB) MARS Unix
- 6050-0006-101
- Connector Panel FRE/POR F-MXG (without InvBP ) Cardiocap/5
- 6050-0006-243
- Connector panel Italian F-MXG (with Spirometry and InvBP) Cardiocap/5
- 2030912-001
- FRU Battery MAC 400 Power Parts.
- 2031342-001
- Main PCB assembly MAC 400 Electrical Parts.
- 2034040-001
- Hardware kit MAC 400 Mechnical Parts.
- M1042800
- A-Cart H Dove Tail legs profile kit (includes both the left and right side legs of the cart) ADU Cart A-CART and frame A-AUF Spare Parts for S/5 ADU from S/N: 6000000 to 39999999 and greater thean S/N:40300000
- A-DR1
- Drawer A-DR1 complete ADU Cart A-CART and frame A-AUF Spare Parts for S/5 ADU from S/N: 6000000 to 39999999 and greater thean S/N:40300000
- A-DR-01
- Drawers (1 piece) ADU Cart A-CART and frame A-AUF S/N:40000000 to 40299999
- 2036804-001
- DOOR BATT TUFFSAT PINK W/SCREW TuffSat Pulse Oximeter
- 8502525
- Accessory rail top shelf with sloping edge 25/30x10m ADU Rear side
- 8502527
- Accessory rail rear with slooping edge 25/30×10 mmm (DIN type) ADU Rear side
- 90713
- Nut for EVAC connector 90714 ADU Hose connectors A-WGU side
- 8502638
- Needle valve ADU A-SEJ2 and flow indicator and scavenging flow indicator
- 6600-1288-500
- Retaining Frame Giraffe Incubator Probe Panel Assembly
- 6600-2325-102
- Patient Probe Label Giraffe Incubator Probe Panel Assembly
- 6600-2325-101
- Blank Label Giraffe Incubator Probe Panel Assembly
- 6600-1007-600
- Touch Panel Assembly Giraffe OmniBed Display Module.
- 6600-1132-500
- Alarm Lens Giraffe Incubator Display Module
- 6600-1736-501
- Right (east) Seal Giraffe Incubator Display Module
- 6600-1736-502
- Left (west) Seal Giraffe Incubator Display Module
- 6600-0878-600
- 3.15 amp fuse (relay brd. 10 or higher) Giraffe Incubator Electrical enclosure
- 6600-1324-602
- 120V 2 amp fuse Giraffe Incubator Electrical enclosure
- 6600-0746-700
- E-base/canopy transformer Giraffe Incubator Electrical enclosure
- 6600-1003-600
- Solid state relay Giraffe Incubator Electrical enclosure
- 6600-1798-500
- Wire shield Giraffe Incubator Electrical enclosure
- 6600-1014-602
- Power switch (115V) Panda iRes & Giraffe Warmers Power board & outlet panel.
- 6600-1014-601
- Power switch (230V) Panda iRes & Giraffe Warmers Power board & outlet panel.
- 6600-1857-500
- Single plug guard C.E. cord (long) Giraffe Incubator Electrical enclosure
- 6600-0337-400
- Plug ground Panda iRes & Giraffe Warmers Power board & outlet panel.
- 6600-0430-600
- Connector Servo-controlled humidifier – Lid and Tray assembly
- 6600-0768-500
- Humidifier fill tray (reservoir/sump) Servo-controlled humidifier – Lid and Tray assembly
- 6600-0755-500
- Bezel seal Servo-controlled Humidifier Controller Assembly
- 6600-0686-500
- Wax motor shaft Servo-controlled humidifier Heat Sink and Valve Assembly.
- 6600-0682-500
- Valve Servo-controlled humidifier Heat Sink and Valve Assembly.
- 6600-0309-400
- Stability weight (prior to HCB serial no) Elevating Base and Stationary Pedestal External components.
- 0217-5321-500
- Pin Infant Warmer Bed Assembly.
- 0217-5259-100
- Rubber boot (not shown) Infant Warmer Bed Assembly.
- 0217-5283-100
- Valve Bed Hydraulic Plate Infant Warmer Bed Assembly.
- 0217-5312-549
- Pivot Rod Infant Warmer Bed Assembly.
- 0209-0079-300
- Bearing Infant Warmer Bed Assembly.
- 0217-5385-810
- Replacement Bed Assembly Infant Warmer Bed Assembly.
- 6600-1708-500
- Delrin washer Giraffe OmniBed Rail End caps.
- 6600-1465-500
- Lower buoyancy spring Giraffe OmniBed Rail End caps.
- 6600-1185-400
- Grooved pin Giraffe OmniBed Belt channel -1 (lift motor side).
- 6600-1375-500
- Bottom sprocket axle Giraffe OmniBed Belt channel -1 (lift motor side).
- 6600-1184-400
- Washer Giraffe OmniBed Belt channel -1 (lift motor side).
- 6600-1376-500
- Spacer Giraffe OmniBed Belt channel -1 (lift motor side).
- 6600-1373-500
- Sprocket Giraffe OmniBed Belt channel -1 (lift motor side).
- 6600-1377-500
- Spacer Giraffe OmniBed Belt channel -1 (lift motor side).
- 6600-1090-400
- Bearing Giraffe OmniBed Belt channel -1 (lift motor side).
- 6600-1328-600
- Humidifier isolation transformer Giraffe Incubator Humidifier Transformer and RS232 option
- 6600-1471-500
- Door support Giraffe OmniBed Radiant Heater.
- 6600-1865-504
- Rear (north) canopy seal Giraffe OmniBed Canopy.
- 6600-1044-400
- Door spring Giraffe Incubator Lower chassis
- 6600-1450-500
- Side roller Giraffe OmniBed Rail End caps.
- 6600-1176-400
- Gearbox coupler Giraffe OmniBed Uprights and lift rail components.
- 6600-0217-850
- Motor & gear box kit Giraffe OmniBed Uprights and lift rail components.
- 6600-1089-400
- Spring Giraffe OmniBed Lift rail (both sides).
- 6600-1482-500
- Cord wrap Giraffe OmniBed Lift rail (both sides).
- 6600-1124-400
- Dog point set screw Giraffe OmniBed Lift rail (both sides).
- 6600-0252-850
- Light pipe (includes all parts) Giraffe Spot PT Lite Light pipe.
- 6600-0904-500
- Selector knob IRS Internal parts.
- 6600-2136-102
- Front label- French IRS Internal parts.
- 6600-2136-103
- Front label- Spanish IRS Internal parts.
- 6600-2136-111
- Front label- Portuguese IRS Internal parts.
- 6600-0441-400
- Cap head adjustment screw IRS Internal parts.
- 6700-0561-800
- Hex nipple 1/8 x 1/8 NPTM Infant Warmer Flowmeter Assembly.
- 6600-0550-800
- Valve (80 PSI marked on valve) Infant Warmer Oxygen Yoke and Regulator Assembly 1 – Regulator.
- 6600-0935-500
- Male fitting .16 OD x .125- 27 NPT Ext IRS Flowmeter assembly.
- 6700-0187-500
- Locking plate IRS Continuous Vacuum Regulator.
- 6600-0918-500
- O-ring sleeve IRS S1 valve assembly.
- 6600-0659-400
- Spring IRS S1 valve assembly.
- 6600-0919-500
- Selector rotor IRS S1 valve assembly.
- 6700-0131-500
- O-ring IRS S1 valve assembly.
- 6600-0916-500
- Valve housing IRS S1 valve assembly.
- 6600-0723-400
- Connector elbow tubing .190 – 32 IRS S1 valve assembly.
- 6600-0700-400
- Set screw .250- 20x .19 IRS S1 valve assembly.
- 6600-0662-400
- O-ring .174 ID IRS S1 valve assembly.
- 6600-0909-500
- Detent ball .375 dia. IRS S1 valve assembly.
- 6600-0900-500
- Shuttle valve IRS Rear internal parts.
- 6600-0722-400
- Jam nut 3/8 IRS Rear internal parts.
- 6730-0350-800
- Vacuum pump mufflers IRS Rear internal parts.
- 6600-0903-500
- Union Y connector IRS Rear internal parts.
- 6600-0891-500
- O2 Manifold IRS Rear internal parts.
- 6600-0742-400
- O-ring (included with item 2) IRS Rear internal parts.
- 6600-0730-205
- Hour meter kit (includes hardware and harness) BiliBlanket Plus High Output Back.
- 6600-0730-219
- Port connector assembly BiliBlanket Plus High Output Back.
- 6600-0730-208
- Bulb holder assembly with hardware BiliBlanket Plus High Output Back.
- 6600-0730-222
- Screw latch kit BiliBlanket Plus High Output Back.
- 6600-0730-209
- Air filter with hardware BiliBlanket Plus High Output Handle and filter.
- 6600-0730-220
- Cover with hardware BiliBlanket Plus High Output Handle and filter.
- 6600-1215-500
- Interface bracket Giraffe OmniBed Canopy.
- 6600-1214-400
- Socket plug (for servo-oxygen hole) Giraffe Incubator Upper chassis and heat sink
- 6600-1163-600
- Blue plastic connector clip for footswitch Giraffe OmniBed Elevating base.
- 6600-0730-203
- Mains input harness (power inlet module to power supply and PCB) BiliBlanket Plus High Output Front.
- 6600-2642-103
- Cover label Spanish BiliBlanket Plus High Output Handle and filter.
- 0217-5286-100
- End cap (black) Infant Warmer Frame Assembly (3400/4000/5000).
- 6600-0703-501
- End cap (grey) Infant Warmer Model 3500 frame assembly.
- 6600-0274-800
- Chest drainage hanger kit (template & hdwr) Infant Warmer Frame Assembly (3400/4000/5000).
- 0217-5038-100
- Cast Iron Base Weight (used on non-elevating models) Infant Warmer Base Assembly (3000/3300/4000/4300).
- 6600-0569-400
- Locking 5 Caster (grey) Infant Warmer Base Assembly (3000/3300/4000/4300).
- 6600-0568-400
- Non-Locking 5 Caster (grey) Infant Warmer Base Assembly (3000/3300/4000/4300).
- 0144-2440-216
- Screw 5/16-18 x 1 Elevating Base and Stationary Pedestal Elevating components.
- 6600-0245-800
- Right Leg Kit (model 3000) Infant Warmer Base Assembly (3000/3300/4000/4300).
- 0203-0232-300
- Hole Plug Infant Warmer Base Assembly (3000/3300/4000/4300).
- 6600-0520-500
- End Cap (black) Infant Warmer Ventilator Mounting Post.
- 6600-0520-501
- End Cap (grey)(after HCB serial no.) Infant Warmer Base Assembly (3000/3300/4000/4300).
- 6600-0255-850
- EPROM (U3) Giraffe Incubator Servo Control Oxygen PC board
- 6600-1854-500
- DIN rail Giraffe Incubator Drainage hangers and DIN rail
- 6600-1718-500
- Tray Giraffe Incubator Storage Drawer
- 6600-1867-500
- Rubber pad Giraffe Incubator E-Cylinder holder (6600-0836-800)
- 6600-2550-100
- Label Giraffe Incubator E-Cylinder holder (6600-0836-800)
- 6600-1866-500
- Goose neck Giraffe Incubator Tubing management arm (6600-0837-800)
- 6600-1862-500
- Tubing plate Giraffe Incubator Tubing management arm (6600-0837-800)
- 6600-0853-800
- Silo Support Assembly Giraffe Incubator Silo Support Assembly (6600-0853-800)
- 6600-2448-102
- Label Max PSI Giraffe Incubator Servo Control Oxygen Valve housing
- 6600-0602-700
- Supply valve Giraffe Incubator Servo Control Oxygen Valve housing
- 0413-3510-335
- Plug Giraffe Incubator Servo Control Oxygen Valve housing
- 6600-1950-500
- Gasket Giraffe Incubator Servo Control Oxygen Valve housing
- 6600-1249-400
- In-line screnn fitting Giraffe Incubator Servo Control Oxygen Valve housing
- 6600-2611-101
- Oxygen inlet label (green) Giraffe Incubator Servo Control Oxygen Valve housing
Buy this spare part, quote availability now.
Meditegic supplies medical imaging technology spare parts and medical supplies with an extensive mature network of +1,200 commercial partners and +500,000 part numbers to support +4,000 customers.
